Russia's insistence on paying for Russian gas in rubles has rattled European countries: Greece held an emergency meeting of suppliers, the Dutch government would urge consumers to use less gas, and the French energy regulator told consumers not to panic. Russian gas meets one-third of Europe's annual energy needs.
Russia said they could expand their demand for ruble payments for other commodities, including oil, grain, fertilizer, coal, and metals, which raised the risk of recession in Europe and the US.
Moscow is expected to unveil its ruble payment plan in early April, but it said it would not immediately ask buyers to pay for gas in rubles.
Western countries have said paying in rubles would be a breach of contract, and renegotiation could take months or longer. This uncertainty has pushed commodity market prices higher.
The supply and prices of other commodities like the lithium battery could also be affected.
Lithium-ion batteries are divided into liquid lithium-ion batteries and polymer lithium-ion batteries. The electrolyte of lithium-ion batteries is fluid, so they are more unstable than lithium-polymer batteries, and they may explode if they are beaten by external forces or use substandard chargers. Many portable electronic products such as mobile phones and laptops use lithium batteries. In other words, many people have a "bomb" by their side. You must pay attention to the following points for safety reasons when purchasing.
1. Is there a clear indication of the capacity? Batteries that do not have a marked capacity (e.g. 1000mAh or 1000mAh) are likely to be of poor quality or recycled. Many cheap batteries on the market are made of recycled battery cores. Although the price is low, the lifespan is short, and the quality is unstable. Careless use may damage the phone.
2. There is no guaranteed standby time. Standby time refers to the continuous use time after the battery is installed in the mobile phone to the subsequent charging. Generally, the batteries sold on the market cannot guarantee the standby time for customers. This is because the quality of the batteries is unstable. Many cheap batteries use poor quality battery cores, so the standby time is short.
3. Whether to install a safety protection circuit board. Without a protective circuit board, the lithium battery is at risk of deformation, leakage and explosion. Under the vicious price-cutting competition, various companies seek lower-priced protection circuit boards or omit this device, making the market full of lithium batteries with a danger of explosion. Consumers cannot tell whether there is a protective circuit board from the appearance, so it is best to choose a reputable merchant to buy.
On January 19, 2022, The Ministry of Industry and Information Technology will guide relevant units to speed up the formulation of lithium battery coding standards.
Lithium primary battery
With metal lithium as the negative electrode and heat-treated manganese dioxide as the positive electrode, the separator is made of PP or PE film. The cylindrical battery is the same as the lithium ion battery separator. The electrolyte is an organic solution of lithium perchlorate, cylindrical or a button type. . The battery needs to be produced in a dry environment with a humidity of ≤1%.
Features: low self-discharge rate, annual self-discharge can be ≤ 1%, fully sealed (metal welding, laser seal) battery can meet ten years of life, the semi-sealed battery is generally five years, if the work control is not reasonable, it can not reach this life. Yiwei, which has done an excellent job developing cylindrical lithium-manganese batteries, has realized automatic production. The battery can be tested for short-circuit and over-discharge without explosion.
Generally, there is a button-type lithium battery on the motherboard of a desktop computer, which provides a weak current and can be used generally for about three years. Some hotels also use lithium-manganese dioxide batteries for access control cards, instruments, etc., which are used year by year decline.
With metal lithium as the negative electrode, the positive electrode and the electrolyte are thionyl chloride (thionyl chloride), the cylindrical battery has electricity after assembly, and the voltage is 3.6V. quality) battery with the highest capacity. It is suitable for electronic instruments and equipment that cannot be maintained frequently and provides good current.
Other lithium batteries include lithium-ferrous sulfide batteries, lithium-sulfur oxide batteries, etc.
High-quality lithium batteries supplier
Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to research, development, production, processing, sales, and technical services of lithium ion battery anode materials. After more than ten years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other harmful materials (silicon-carbon materials, etc.). The products are widely used in high-end lithium ion digital power and energy storage batteries. If you are looking for Lithium battery anode material, click on the needed products and send us an inquiry：firstname.lastname@example.org
A preparation developed in China; the comfort and the multifunctional properties of nanomaterials make "dead skin" capable of sensing again. Electronic skin is artificial skin that mimics the function of human skin. Recently, the world-renowned journal Advanced Science reported a simple and highly programmable electronic skin on a leather substrate developed by a Chinese team, which combines the natural complex structure of leather, the comfort of wearing, and the multi-functional properties of nanomaterials. , so that the "dead skin" has the ability to sense again.
In the future, lithium battery will be used in various high-tech fields, and the market demand for lithium battery will also be great. Please contact us for more information on lithium battery.
The main difference between silicon carbide and boron carbide is that in silicon carbide one silicon atom bonds to one carbon atom, whereas in boron carbide four boron atoms bond to one carbon atom.…
The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and al…
The World Platinum Investment Association (WPIC) said recently that carmakers are accelerating reductions in palladium use and increased use of platinum due to concerns about Russian palladium supplies. However, it still expects a significant surplus…